| Ion Analyzer Automat |
|
|
| GAT
DKK-TOA IA-200 |
|
|
| |
|
|
Environment |
|
|
| |
|
Industry |
|
|
|
| |
Agriculture |
|
|
|
|
| Quality Control |
|
|
|
|
|
 |
|
Specifications:
|
| Measurable
Anions: PO4, F, CI, NO2, BR1, NO3, SO4 |
Measurable
Cations: Lu, Na, NH4, K, Mg, Ca |
| Measurement
range with 20ul sample loop: |
| F, CI, NO2,
BR, NO3 |
0.5 - 50.0
mg/l |
| SO4 |
1.0 - 100.0
mg/l |
| PO4 |
1.0 - 100.0
mg/l |
| Li |
0.05 -10.0
mg/l |
| NA, NH4 |
0.25 / 0.5 - 25.0 / 50.0 mg/l* |
| K |
0.5 / 1.0 - 50.0 / 100.0 mg/l* |
| Mg |
0.25 / 0.5 - 25.0 / 50.0 mg/l* |
| Ca |
0.5 / 1.0 - 50.0 / 100.0 mg/l* |
| * depending on measurement mode and column |
| Measurement
range with 200ul sample loop: |
| F, CI, NO2,
BR, NO3 |
0.05 - 5.0
mg/l |
| SO4 |
0.10 - 10.0
mg/l |
| PO4 |
0.25 - 10.0
mg/l |
| Li |
0.005 -1.0
mg/l |
| NA, NH4 |
0.025 / 0.05
- 2.5 / 5.0 mg/l* |
| K |
0.05 / 0.10
- 5.0 / 10.0 mg/l* |
| Mg |
0.025 / 0.05
- 2.5 / 5.0 mg/l* |
| Ca |
0.05 / 0.10
- 5.0 / 10.0 mg/l*s |
| * depending on measurement mode and column |
| Repeatability:
variation 2% or less at 1/2 concentration of upper limit of measurement
range of each ion |
| Sample
injection : manual sample injection and manual valve change-over
(Autosampler optional) |
| Sample
measure: loop cut method, loop capacity: 20ul or 200ul |
| Measurement time: approximately 15 minutes per analysis |
| Calibration: one point calibration by specified calibration solution |
|
|
| Column
oven: 40 +- 40C |
| Data
processing: built-in |
| Detector
: electric conductometric detector, triplepole electrode, cell temp. control: 40 +- 40C |
| Display:
graphic LCD |
| Printer:
dot type thermal printer built-in |
| Usable
temp. range: 10 - 350C, no sudden temperature change 0C |
| Output:
analogue: 0 - 1 V DC, Digital: RS232 |
| Autosampler:
optional |
| Power source:
100 V,50/60 Hz, other voltage available upon request |
| Weight:
approximately 12 kg |
| Dimensions:
approximately 240(w) x 420(h) x 342(d)mm |
|
|
|
| The GAT DKK-TOA
IA-200 Ion Analyzer Automat is a compact, very easy to use and highly
reliable ion chromatograph with superior cost effectiveness. Since data
processing function and menu driven operation is built in, simultaneous
multi items measurement of 7 anions or 6 cations down to ppb-level can
be obtained by everyone, without special knowledge of chromatography.
Optional auto-sampler allows multiple-sample measurements. |
|
|
|
Ion Chromatography for everyone
- Very simple operation
by just injecting calibration solution or sample solution and turning
valve lever
- Data such as chromatogram,
etc. can be displayed on easy-to-see and large graphic display
- Measured concentration
of ion is automatically calculated and result and chromatogram printed
out on built-in printer
- Simultaneous multi items
measurement can be obtained with selectable modes for mono- and divalent
anions, mono- and divalent cations, mono-valent cations only, divalent
cations only
- Replacement of column
and pipe laying can be done at the front side, permitting easy maintenance
- All the components such
as pump, injector, detector, oven, degasser & data processor are
encased in one case
|
|
|
|
Accessories:
- With optional auto-sampler
connected, automatic measurement of multi-sample is available
- Column, Guard column, calibration
solution, eluent solution for anion and cation measurement
- Standard accessories: 1ml
disposable syringe for sample injection, injection needle, sample loop
20ml and 200µl, printer paper, syringe set for air removal, spanner,
power cord, grounding wire, instruction manual
|
|
|
Method:
Ion chromatography
is a type of liquid chromatography to separate and measure ionic substances.
The ion chromatography system is basically composed of a pump to feed
eluent, an injector section to inject a sample, a column which is related
with separation of anions or cations, a column oven to keep the column
temperature constant, a detector to registrate the separated substances
and – if desired – an auto sampler.
The most common detector in ion chromatography is a conductivity detector.
It measures the change in the conductivity of the ions eluted from the
column.
|
|
|
|
Consultancy, Accessories and Service
Our many year´s experience
in the development, usage and servicing of analysis instruments enables
us to provide direct hands-on advice concerning our applications and we
are also your reliable partners in the field of accessories, service and
repairs..
Just get in touch and we´ll
get you moving!
|
|
|
|
Du
you have any further questions
?
ic@gatgmbh.com
|
|
|
|
You can also download the
GAT DKK-TOA IA200 brochure as powerpoint
file.
save on your hard-drive and print afterwards
please press the rigth mouse-button, target save as ...
|
|
|
| |
|
|
|
|
|
